Elite PorscheReplacing the window regulator on a Porsche Taycan can be a complex task due to the vehicle’s advanced electronics and construction. Here’s a general guide on how you might approach this task:

  1. Disconnect the Battery: Before starting the work, we disconnected the vehicle’s battery to prevent accidental deployment of the airbags or damage to electrical components.
  2. Remove the Door Panel: Carefully pry off the door panel using a trim removal tool. We were cautious not to damage the clips or the panel itself. Once the panel is removed, we have access to the interior of the door.
  3. Access the Window Regulator: We Located the window regulator assembly inside the door. It is connected to the window glass and the window motor. Depending on the design of the Taycan, we may need to remove additional components to access the regulator.
  4. Disconnect Electrical Connections: Disconnect any electrical connections to the window regulator, including the wiring harness and any control modules.
  5. Remove the Window Glass: Carefully lower the window glass until you can access the mounting bolts or clips that secure it to the regulator. Remove these fasteners and carefully lift the window glass out of the door frame.
  6. Replace the Regulator Assembly: Unbolt the old window regulator from the door frame and remove it from the vehicle. Install the new window regulator assembly in the reverse order of removal. Be sure to follow any specific instructions provided with the replacement part.
  7. Reassemble the Door: Once the new regulator is installed, reattach the window glass to the regulator and secure it in place. Reconnect any electrical connections and test the window to ensure proper operation.
  8. Reinstall the Door Panel: Carefully reinstall the door panel, making sure to line up the clips and fasteners correctly. Once the panel is in place, secure it with any screws or bolts that were removed during disassembly.
  9. Reconnect the Battery: Finally, reconnect the vehicle’s battery and test the window again to ensure everything is working correctly.